Dear Starhub,
Please check iPv6 on Fibre Broadband. It is not working now!
I have restart my ONT & Router, It is still not working.
Kindly check on your end!
bump for attention, facing the same issue as well
Hi @Tomaz
Are you still facing this issue? If so, please provide me your full name, NRIC/FIN number, contact number and email address via Private Message and we'll keep in touch.
Dear Starhub,
I have already PM you and replied with my details, 3 days has passed, still no response from your side!
What is going on? Are you taking this issue seriously?
Very disappointing with your slow.... response!
Time Message
Sun May 27 18:21:09 2018 | dhcp6_ctl_authinit: failed to open /var/etc/dhcp6cctlkey: No such file or directory |
seeing this error - not sure if it's significant
Using Dlink 868L
so far i've tried
1.) Rebooting router
2.) Reset router to factory default
3.) Reloaded firmware 1.21SHC
and ipv6 still not working... one thing is clear, router is not receiving WAN IP from Starhub side, if it's router config issue, usually will still see the IP & DNS address
Hi kon_sg,
So far i do not have such problem as my ipv6 still available.
The ipv6 connection type is Local Connectivity Only and the Address is /64
As i am also using DIR-868L but on firmware 1.09SHC.
And my IP remain the same since.
Maybe you could request for new IP to see if it resolved the this issue or not.
Since i do not have problem on using the same router model.
Notice this started during the last breakdown on fibre broadband as there were some complained.
Although some able to resolve this but other did noted that this happened again recently.
For your info.
Regards,
Eric.
Did a run a setup wizard for IPv6.
Result & Test;