Skip to main content
Ashan Gamage's profile

Respected Commentator

 • 

4 Messages

Thu, Dec 29, 2016 7:00 PM

Default Router Logins - Technicolor TG582n

Capture.JPG

 

Can any one help me to find default login details. I have reset my router already. Now i cant login default Technicolor TG582n logins. I think starhub have change those things.

Responses

MarkieYe2014

Honored Commentator

 • 

9 Messages

4 y ago

Based on the generic manual at page 32 there are two possibilities; but if you've already tried these two then just have to wait for SH to officially reply.

 

Default user name
The default user name is Administrator.

 

Default password

The default password is either blank or the ACCESS KEY printed on the label of your Technicolor Gateway. This depends on the settings chosen by your Service Provider.

 

http://help.demon.net/files/2013/03/TG582n-User-Guide.pdf

eric3743

Grand Guru

 • 

4.4K Messages

4 y ago

Hi  @Ashan Gamage

 

Mostly there is no need to change the Login username and password.

Just click on the Login.

Unless you yourself did input a username and password when you do your 1st setup setting.

 

Most router login page is set as default and no need to do any input, just click on Login.

And the IP:   192.168.0.1

 

Do refer to this link:

http://m.setuprouter.com/router/technicolor/tg582n/login.htm

 

Starhub do not set any username and password.

 

If unable to access, then you can do a reset.

This will reset to default login.

 

 

--------------------------------------

I am not Starhub staff &or related to.

Respected Commentator

 • 

4 Messages

4 y ago

Hi,

Actualy i tried this one, but not working.

Honored Commentator

 • 

9 Messages

4 y ago

Hi @eric3743,

 

The information in the link you provided states that the default IP address for the TG582n  is "192.168.1.254" and Username and Password as "unknown"...

 

 

 

 

 

Respected Commentator

 • 

4 Messages

4 y ago

HI,

 

actualyi this is default ip for this model, but for my router ip is 10.0.0.1.

and in the login page you can see starhub logo.

that measn starthub already change router firmware and default login details to protect their router.

Respected Commentator

 • 

4 Messages

4 y ago

HI,

 

router login IP is 10.0.0.1. Thats why i thinking starhub change its firmware. you can see, in my questin i have attached login page image. that one have starhub logo. i reset few times and tried to login with default login details. but not working

eric3743

Grand Guru

 • 

4.4K Messages

4 y ago

Hi  @MarkieYe2014

 

Oh i forgot to mentioned that is for DLink router.

My aplogies.

 

If you are using Fibre Broadband, most router are provide free as in the package.

I understand that some prefer to use their own router.

It was advice to contact Technical dept to have a direct ONT, it depend.

For free router, especially DLink, the IP is default as not change in username & password, as just click to Login to the setting pages.

Alternately, by press+hold reset button for about 15 sec, this will be reset.

 

Starhub only lock the ONT setting as Port-1 for internet and Port-2 for IPTV.

If subscriber include IPTV, then Port-2 is enable.

If subscriber did not include IPTV, Port-2 is disable.

Do note that the ports for each services is fixed.

 

Maybe you could write to Starhub regarding this matter, as they have to check on their end.

 

Do write to fourm staff to assist you on this matter.

Please submit and provide with the following information;

Registered subscriber name, NRIC/FIN number, email, contact, and any other details;

PM @Jolene_L  or  Santosh Rai  to assist and look into your case on this matter

 

How to send a PM (Private Message) on StarHub Community?

 

 

--------------------------------------

I am not Starhub staff &or related to.

Get Started

Get Started